Cradle Rest 5 Zone Pocket Spring Mattress
Zoned pocket spring mattress with a plush quilted top
Hurry! Only 12 units left in stock!
Overview
Zoned support, plush on top
Cradle Rest tops a 25 cm, 5-zone pocket spring core with a plush quilted comfort top — cushioned where you lie, with support tuned across five zones along the body, and delivered rolled and vacuum-packed in a box ready to unroll at home.
5-zone support
A 25 cm pocket spring core split into five zones for targeted support along the body.
Plush quilted top
A quilted knitted cover over polyester fibre and comfort foam for a soft, cushioned surface.
Medium, 5/10 feel
Balanced support and cushioning — a popular all-rounder feel.
Rolled & boxed
Rolled and vacuum-packed in a box, so it's easy to move through the home and unroll.
Cradle Rest is for you if…
You want zoned support
Five spring zones tuned to support different parts of the body.
You share the bed
Independently moving springs help limit partner disturbance.
You like a plush, cushioned top
With supportive springs underneath.
You want easy setup
Works with any standard bed frame or base.
Feel & firmness
How firm is it, and who is it for?
Cradle Rest sits at medium on the scale — balanced support with a cushioned top, rather than a soft, sink-in surface or a hard, unyielding one. Here is exactly where it lands, and who tends to get on best with it.
Medium· 5 / 10
Suits
- Back sleeperssupport through the lower back
- Combination sleeperseasy to move and change position on
Firmness is subjective — how firm a mattress feels varies with body weight and sleeping position. We recommend trying it in person at one of our five SE QLD showrooms before you decide.
Next
Inside the mattressWhat you are actually sleeping on
5-zone support, explained
A single-firmness spring layer treats your whole body the same. Cradle Rest splits its pocket spring core into five zones along the length of the bed, so each part of the body gets support suited to it — firmer through the centre to hold up the hips and lower back, with a little more give at the shoulders. The aim is a more even, neutral line through the spine and fewer pressure points where you lie.
Better alignment
Support that follows the body helps keep the spine in a more neutral line.
Pressure relief
A little more give at the shoulders eases pressure for side and combination sleepers.
Steady centre
Firmer middle zones help support the heavier hips and lower back.
Quilted knitted top
Plush cushioned top — polyester fibre + comfort foam
Support foam
5-zone pocket spring system
1.9/2.0 mm gauge, individually wrapped springs
Reinforced base
Foam base panel + backing
Total height
Dimensions & specificationsEvery number we can stand behind
| Type | Pocket spring — 5-zone, quilted top |
|---|---|
| Firmness | Medium · 5 / 10 |
| Total height | 30 cm |
| Support core | 25 cm, 5-zone pocket spring system |
| Spring gauge | 1.9 / 2.0 mm |
| Comfort layers | Polyester fibre + 3 cm comfort foam (quilted top), 2 cm support foam |
| Cover | Knitted fabric |
| Sided | Single-sided — do not flip; rotate head-to-foot |
| Mattress size (selected) | 92 × 187 cm |
| Boxed size (selected) | 98 × 33 × 33 cm |
| Delivered | Rolled & vacuum-packed in a box |
| Warranty | 3 years |
All sizes follow Australian Standard mattress dimensions. There is no Super King in this range. We haven't published a per-size pocket spring count for this model — call 07 3161 5415 if you need that figure before ordering. Measurements are taken by hand and can vary slightly between shipments.
🧭Room clearance
Allow 60–75 cm around the piece to move comfortably; remember the frame footprint runs a few cm larger than the mattress.
📐Total height
Total height = base + your mattress, so a tall base plus a deep mattress can sit high — worth checking for getting in and out.
🚙Pickup vehicle
For free Rocklea pickup, a flat-pack fits most cars, but an assembled or oversized item needs a van, ute or trailer.
Australian size chart
| Size | Mattress size (W × L) | Boxed size (L × W × H) |
|---|---|---|
| Single | 92 × 187 cm | 98 × 33 × 33 cm |
| King Single | 106 × 203 cm | 111 × 33 × 33 cm |
| Double | 137 × 187 cm | 141 × 33 × 33 cm |
| Queen | 153 × 203 cm | 159 × 33 × 33 cm |
| King | 183 × 203 cm | 189 × 33 × 33 cm |
Australian sizes differ from US and UK — always check the centimetre dimensions, not just the name. Unsure which to choose? Read our Australian bed sizes guide.
Materials & careLooking after it
- Cover
- Knitted fabric, quilted with polyester fibre + comfort foam
- Comfort layers
- 3 cm quilted top + 2 cm support foam
- Support core
- 25 cm, 5-zone pocket spring system, 1.9/2.0 mm gauge
- Base
- Foam base panel + backing
- Total height
- 30 cm
- Sided
- Single-sided — rotate head-to-foot, never flip
- Warranty
- 3 years
Care instructions
Rotate regularly
Turn it head-to-foot every few months to help it wear evenly. Cradle Rest is single-sided — the comfort layers are only on top, so flipping it puts you on the base.
Use a protector
Keeps the cover cleaner and guards against everyday spills. Staining is not covered by the warranty, so this is the cheapest insurance you can buy.
Let it breathe
Air it out from time to time and keep the room well ventilated.
Spot clean only
Damp cloth and mild cleaner; avoid soaking or harsh chemicals.
Recommended care products
What's in the boxHow it arrives & unboxing
Cradle Rest is rolled, vacuum-packed and boxed — one box per mattress. That is what makes it easy to fit in a vehicle and carry through a doorway or up a stairwell before you unroll it.
| In the box | 1 × mattress, rolled and vacuum-packed |
|---|---|
| Boxed size (selected size) | 98 × 33 × 33 cm |
| Number of boxes | 1 |
| Assembly | None — unroll and let it expand |
Unbox where it will live
Carry the box into the bedroom and get it onto the base before you cut the wrapping. Once it starts expanding it is much harder to move.
Ready within hours
It starts expanding as soon as it is unwrapped and is generally ready to sleep on within a few hours. Like all rolled mattresses it can keep settling over the following days.
Don't re-roll or fold it
Once expanded it is not designed to be compressed again. Folding or bending it can damage the spring unit and is not covered by the warranty.
Easy to pick up
The boxed dimensions above make it straightforward to plan a pickup from our Rocklea warehouse in most vehicles with the seats down.
New foam and fabric can carry a faint manufacturing smell when first unwrapped. Airing the room for a few hours clears it.
Delivery & pickupGetting it to you
Delivery cost depends on distance. Free local delivery to eligible addresses near Rocklea — terms apply.
Estimate delivery to your postcode
Estimate shipping
From our Rocklea distribution warehouse, by appointment.
Base & frame
What base does this mattress need?
The most common question we get on a mattress — and the one most listings never answer. The base underneath matters as much as the mattress itself, both for how it feels and for your warranty.
Bases this mattress suits
Use it on a solid or platform base, a slatted base with evenly spaced slats. The surface underneath needs to be flat and fully supportive across the whole mattress — no box spring required.
Slat spacing
As a general industry guide, slat gaps of more than about 7.5 cm can leave a mattress under-supported and may affect your warranty. If you are not sure what your base measures, send us a photo or call 07 3161 5415 and we will check it with you before you order.
Need a frame to match?
Every Australian size pairs with a frame of the same name — a Single mattress goes in a Single frame. Browse matching bed frames →
An unsupportive or incorrectly spaced base can affect both comfort and your warranty — see the warranty section below.
Warranty3-year warranty & your rights
Your mattress is covered against manufacturing faults in materials and workmanship for 3 years from the date of purchase.
What the warranty does not cover
- Damage caused by an unsupportive base — a sagging base, or slats spaced too far apart. See “What base does this need?” above.
- The gradual softening and body impressions that all comfort layers develop with normal use. This is expected settling, not a fault.
- Damage from misuse, standing or jumping on the mattress, bending or folding it, or moving it without proper support.
- A change of mind about comfort or firmness. Firmness is personal, so please try it at one of our showrooms before you buy.
No online trial — something better. Firmness is personal and no amount of online description settles it. Lie on this mattress at any of our five SE QLD showrooms — Rocklea, Virginia, Bundall, North Ipswich and Beenleigh — and buy it knowing exactly how it feels.
This warranty is in addition to your rights under Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure, and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
ReviewsWhat buyers say
FAQ
Questions we get asked
The pocket spring layer is divided into five sections along the length of the mattress, each tuned to give a slightly different level of support — firmer through the centre to support the hips and lower back, with a little more give towards the shoulders. The aim is to help keep the spine in a more neutral position.
It has a medium feel — around 5 on a 1 to 10 scale — with a plush quilted top over supportive, zoned pocket springs. Firmness is subjective, so we'd always suggest trying it in person at one of our five SE QLD showrooms.
Use it on a solid (platform) base or a slatted base with evenly spaced slats. An unsupportive base can affect comfort and may affect your warranty. If you are not sure what your base measures, send us a photo or call 07 3161 5415 and we will check it with you.
Yes. It is rolled, vacuum-packed and boxed, which makes it easy to fit in a vehicle and carry through the home before you unroll it.
Once unboxed it starts expanding straight away and is generally ready to sleep on within a few hours. Like most rolled mattresses, it can keep settling over the following days.
No. The Cradle Rest is single-sided, with the quilted comfort top on one side, so it is not designed to be flipped. Rotate it head-to-foot every few months to help it wear evenly.
Yes. The springs are individually wrapped (pocket springs), so they move largely on their own rather than as one connected unit. That helps absorb movement and limit the disturbance you feel when someone shifts or gets in and out of bed.
Yes — and we would rather you did. We do not run an online sleep trial, because we think lying on a mattress beats reading about one. Cradle Rest is on display across our five SE QLD showrooms in Rocklea, Virginia, Beenleigh, Bundall (Gold Coast) and North Ipswich. Floor models can vary, so call ahead if you want a specific size. For change-of-mind and faults, see our warranty and returns policy — and note your rights under Australian Consumer Law always apply on top of any warranty.
Full detailsCradle Rest 5 Zone Pocket Spring Mattress — full product details
The Cradle Rest is a pocket spring mattress built around a 25 cm, 5-zone spring core and finished with a plush quilted comfort top. The five spring zones tune their support along the length of the body — firmer through the centre to support the hips and lower back — while the quilted top of polyester fibre and comfort foam cushions the surface, in a 30 cm profile. Our mattress buying guide covers firmness, spring structure and materials in more detail.
It comes in five Australian Standard sizes — Single, King Single, Double, Queen and King — all following standard Australian mattress dimensions (there is no Super King in this range). At a balanced 5 out of 10, its cushioned top over a supportive, zoned spring core makes it a comfortable all-rounder for everyday sleeping, while the individually wrapped springs help limit partner disturbance for couples. Cradle Rest arrives rolled and vacuum-packed in a box, and works on any solid (platform) or slatted base.
Pair it with a bamboo waterproof mattress protector to keep the cover clean, and browse our pocket spring and medium firm mattress ranges, or the full mattress in a box collection. Need a frame too? See our bed frames. Or come and lie on it at one of our five South-East Queensland showrooms in Rocklea, Virginia, Beenleigh, Bundall and North Ipswich.




