Castle 4 Piece Tallboy Bedroom Suite
Grey fabric channel-tufted bed frame, 2 bedside tables & a 6-drawer tallboy — Queen & King
Hurry! Only 3 units left in stock!
Buy now, pay later — interest-free options
Choose your provider and plan at checkout
Professional assembly — terms & conditions
The professional assembly service applies to ground-level rooms only. It is not available for apartments or for rooms located on an upper floor.
The service covers assembly of the product only. Removal and disposal of packaging materials is not included.
The A2Z Furniture Pty Ltd and its staff accept no liability for any accidental damage to the customer’s property that may occur while bringing goods inside or during assembly.
It is the customer’s responsibility to ensure the pathway for delivering the goods is clear and unobstructed. Additional charges may apply if extra work is required to clear access.
To assess whether the assembly can be carried out safely and efficiently, The A2Z Furniture may request further information about the property, including photos or video of the layout.
If the product cannot be delivered to the intended room due to insufficient space, the delivery and assembly charges are non-refundable.
The A2Z Furniture reserves the right, at its sole discretion, to decline or cancel the assembly service. Where this occurs, any assembly fee already paid will be refunded in full.
Overview
A coordinated Castle bedroom, with a 6-drawer tallboy
The Castle 4 Piece Tallboy Bedroom Suite pairs the Castle Bed Frame with two matching Castle Bedside Tables and the Castle Tallboy, all finished in the same light natural rubberwood so the whole room reads as one considered setup rather than pieces bought separately over time. The bed's headboard brings a soft grey fabric channel-tufted centre panel flanked by two reeded timber wing panels; each bedside table adds a smooth top drawer with a black bar handle above a vertically fluted lower drawer; the tallboy adds six drawers — two reeded, four plain — for extra clothing storage. Available in Queen and King.
Three-Material Headboard
A soft grey fabric channel-tufted centre panel, flanked by two reeded timber wing panels with curved rounded corners.
Two Warm Oak Bedside Tables
Each bedside table brings a smooth top drawer with a black bar handle above a vertically fluted lower drawer, arriving pre-assembled.
Six-Drawer Tallboy
Two small reeded drawers over four wide plain drawers with slim black bar handles — plenty of extra clothing storage, arrives assembled.
Guaranteed Finish Match
All four pieces come from the same light natural rubberwood production batch — a match you can't guarantee buying the pieces apart, months apart.
DimensionsEvery piece, measured
Castle Bed Frame (Queen)
| Fits mattress | 153 × 203 cm |
|---|---|
| Frame footprint (W × L) | 175 × 220 cm |
| Slat height (floor to top of slat) | 32 cm |
| Headboard height | 140 cm |
| Footboard height | 36 cm |
| Cartons (boxed, selected size) | 3 boxes — 180×145×12, 210×40×24 & 175×40×12 cm |
Castle Bedside Table (each, ×2)
| Drawers | 2 each (smooth top, fluted lower) |
|---|---|
| Length / Width / Height | Coming soon |
| Box (single carton, each) | Coming soon |
Castle Tallboy
| Length | 100 cm |
|---|---|
| Width | 40 cm |
| Height | 120 cm |
| Drawers | 6 (2 reeded + 4 plain) |
Total height of the bed = slat height (32 cm) + your mattress depth. The bed ships flat-packed in 3 boxes; each bedside table and the tallboy arrive pre-assembled/assembled in their own cartons. Full bedside table dimensions and tallboy carton dimensions are coming soon — call the showroom on 07 3161 5415 for a current figure. Measure your access route before delivery. Measurements are taken by hand and can vary slightly between shipments.
Works with your mattress
Will it fit your mattress?
The bed's straight wooden slat base takes a standard Queen or King mattress directly — no ensemble base or box spring needed.
Pair with a mattress
Materials & care
One finish, four pieces
Every piece in this suite shares a light natural rubberwood finish. The bed's structural frame is solid rubberwood, with MDF/timber-veneer reeded wing panels and an upholstered fabric centre headboard panel. Both bedside tables and the tallboy use a solid timber frame with MDF panels, engineered wood and rubberwood, matching the bed's tone exactly. Both bedside tables and the tallboy arrive pre-assembled; only the bed needs flat-pack assembly.
- Suite includes
- 1× Castle Bed Frame (Queen or King), 2× Castle Bedside Table, 1× Castle Tallboy
- Bed structure
- Solid rubberwood frame + MDF/timber-veneer reeded wing panels + upholstered grey fabric headboard centre, metal corner brackets
- Bedside construction
- Solid timber frame with MDF panels, rubber wood veneer, smooth top drawer + fluted lower drawer, arrives pre-assembled
- Tallboy construction
- Rubberwood & engineered wood, 6 drawers (2 reeded, 4 plain with slim black bar handles), arrives assembled
- Finish
- Light natural rubberwood (matched batch across all four pieces)
- Warranty
- 12 months
Recommended care products
Safety
Anchor the tallboy — it matters
The bedside tables are freestanding and benefit from the same voluntary wall-anchoring precaution as any bedroom furniture. The tallboy is different — as tall clothing-storage furniture, the Castle Tallboy in this suite must be secured to the wall before use.
- ALWAYS secure the tallboy to the wall with an anchor device.
- NEVER allow children to stand, climb or hang on the tallboy's drawers, doors or shelves.
- NEVER open more than one tallboy drawer at a time.
- Place heavy items down low in the tallboy.
- NEVER place a television on the tallboy.
Wall-anchoring hardware is inexpensive and takes only minutes to fit. If you're unsure how to anchor the tallboy, our showroom team can point you to a suitable anchor kit — call 07 3161 5415.
What's in the box
Ships across the suite
The bed arrives flat-packed; both bedside tables and the tallboy arrive pre-assembled/assembled.
- Bed frame
- 3 boxes — headboard, footboard, side rails, wooden slats & legs, fittings
- Each bedside table
- 1 box — arrives pre-assembled, only handles to fit (2 boxes total for the pair)
- Tallboy
- 1 box — arrives assembled, only handles to attach
- Mattress
- Not included — bed frame only
A screwdriver is needed for the bed (electric drill recommended); two people are recommended for the bed's headboard and footboard panels. The bedside tables and tallboy require no external tools beyond fitting the handles.
Delivery & pickup
Two ways to get it home
Delivery cost is calculated by item and distance — enter your details in the estimator above, or at checkout. We offer free local delivery to eligible addresses within ~10 km of our Rocklea warehouse; terms and conditions apply. Delivery is to ground level / front garage only.
Collect free from our Rocklea distribution warehouse by appointment. Check the bed's carton sizes above fit your vehicle before you come. For full terms, see our Pickup & Delivery Terms.
The Castle suite is covered by a 12-month warranty — see our Warranty Policy. Change-of-mind returns are accepted under our Return Policy; full conditions apply.
Reviews
What buyers say
FAQ
Common questions
One Castle Bed Frame in your chosen size (Queen or King), two Castle Bedside Tables, and one Castle Tallboy — all in the same light natural rubberwood finish. A mattress is not included.
Yes — the bed frame, bedside tables and tallboy are each also sold individually, and a Castle 3 Piece Suite (without the tallboy) is also available. See "More from the Castle range" above.
Queen and King only. Pick your size from the tiles above the Add to Cart button.
The bed ships flat-packed in 3 boxes and needs a screwdriver (electric drill recommended), with two people recommended for the headboard and footboard. Both bedside tables and the tallboy arrive pre-assembled/assembled, only handles to fit. Professional assembly for the whole suite is available as an add-on above.
Yes. Children have died from furniture toppling over, and the tallboy must always be secured to the wall with an anchor device. See the Safety section above for the full warning.
No — the suite includes the bed frame, bedside tables and tallboy only. Browse our pocket spring, memory foam and full mattress ranges to complete the bed.
Full details
Castle 4 Piece Tallboy Bedroom Suite — full product details
The Castle 4 Piece Tallboy Bedroom Suite brings together the Castle Bed Frame, two Castle Bedside Tables and the Castle Tallboy in one coordinated light natural rubberwood finish. The bed's headboard pairs a soft grey fabric channel-tufted centre panel with two reeded timber wing panels; each bedside table adds a smooth top drawer with a black bar handle above a vertically fluted lower drawer; and the tallboy adds six further drawers — two reeded, four plain with slim black bar handles — for extra clothing storage, all in the same finish.
Buying the suite guarantees every timber piece comes from the same production batch — a match that's difficult to guarantee ordering four pieces months apart. It also means one delivery and one assembly booking for the whole bedroom, rather than four separate ones.
Available in Queen and King, the suite is sold frame-only — no mattress is included, so pair it with one of our pocket spring, memory foam or full mattress ranges. Prefer a smaller suite? The Castle 3 Piece Bedroom Suite (bed and bedsides only) is also available, or buy each piece individually. See the Castle range in person at any of our five A2Z Furniture showrooms: Rocklea, Virginia, Beenleigh, Bundall (Gold Coast) and North Ipswich.