Canberra 5 Piece Bedroom Suite
Gas lift bed, 2 bedsides, a 5-drawer tallboy & a 7-drawer dresser
Hurry! Only 3 units left in stock!
Professional assembly — terms & conditions
The professional assembly service applies to ground-level rooms only. It is not available for apartments or for rooms located on an upper floor.
The service covers assembly of the product only. Removal and disposal of packaging materials is not included.
The A2Z Furniture Pty Ltd and its staff accept no liability for any accidental damage to the customer’s property that may occur while bringing goods inside or during assembly.
It is the customer’s responsibility to ensure the pathway for delivering the goods is clear and unobstructed. Additional charges may apply if extra work is required to clear access.
To assess whether the assembly can be carried out safely and efficiently, The A2Z Furniture may request further information about the property, including photos or video of the layout.
If the product cannot be delivered to the intended room due to insufficient space, the delivery and assembly charges are non-refundable.
The A2Z Furniture reserves the right, at its sole discretion, to decline or cancel the assembly service. Where this occurs, any assembly fee already paid will be refunded in full.
Overview
The complete Canberra bedroom, in one order
The Canberra 5 Piece Bedroom Suite is the full range in one order — the Canberra Gas Lift Bed Frame, two matching Canberra Bedside Tables, the five-drawer Canberra Tallboy and the seven-drawer Canberra Dresser with Mirror, all built from solid eucalyptus in the same pale natural finish. The bed's mattress platform lifts on hydraulic gas struts to a storage cavity the full footprint of the frame, while the headboard carries an LED-lit open display shelf with a USB charging port set flush into it and two push-open compartments below. Between the tallboy, the dresser and the two bedsides there are sixteen drawers, plus a matching framed mirror — a complete bedroom that needs nothing added. Available in Queen and King.
Full-Footprint Gas Lift Storage
The whole mattress platform lifts on hydraulic struts to a storage cavity the size of the bed's footprint.
Lit Shelf, USB & Hidden Compartments
An LED strip under the headboard shelf, a USB charging port set flush into it, and two push-open compartments below.
Two Matching Bedside Tables
Two full-width drawers apiece with recessed handle-less pulls, in the same eucalyptus as the bed.
Sixteen Drawers Across the Suite
Five in the tallboy, seven in the dresser and two in each bedside table — plus the dresser's matching framed mirror.
Guaranteed Finish Match
All five pieces come from the same eucalyptus range and finish run — a match you can't guarantee buying the pieces months apart.
DimensionsEvery piece, measured
Canberra Gas Lift Bed Frame (Queen)
| Fits mattress | 153 × 203 cm |
|---|---|
| Frame footprint (L × W) | 230 × 167 cm |
| Headboard height | 121 cm |
| Footboard height | 38 cm |
| Slat height (floor to slat platform) | 35 cm |
| Cartons (boxed, selected size) | 3 boxes — 189×128×20, 216×46×30 & 153×203×5 cm |
Canberra Bedside Table (each, ×2)
| Length | 60 cm |
|---|---|
| Width | 43 cm |
| Height | 58 cm |
| Drawers | 2 |
| Box (single carton, each) | 67 × 49 × 68 cm |
Canberra Tallboy
| Length | 91 cm |
|---|---|
| Width | 45 cm |
| Height | 120 cm |
| Drawers | 5 |
| Box (single carton) | 128 × 52 × 96 cm |
Canberra Dresser with Mirror
| Dresser (L × W × H) | 150 × 45 × 86 cm |
|---|---|
| Mirror (W × H) | 100 × 120 cm (6 cm frame depth) |
| Overall height with mirror fitted | Allow approx. 205 cm |
| Drawers | 7 |
| Cartons | 2 cartons — dresser 157 × 52 × 93 cm, mirror 127 × 111 cm (9 cm deep) |
These figures were measured in-house from Canberra pieces in our showroom on 14 August 2026, not copied from a supplier sheet. Frame footprint is the floor space the assembled bed occupies; the mattress sits on the slat platform, so allow for mattress thickness above the slat height. Check the longest carton against your access route — stairwells, lift doors and tight corners are where flat-packed beds get stuck. Internal drawer measurements and runner type for the bedside tables are available on request. If a measurement is critical, call our showroom team on 07 3161 5415 before you order. Measurements are taken by hand and can vary slightly between shipments.
Works with your mattress
Will it fit your mattress?
The gas-lift platform takes a standard Australian mattress of the matching size directly on its wooden slats — no box spring or ensemble base needed. Queen fits a 153 × 203 cm mattress, King fits 183 × 203 cm.
Pair with a mattress
Materials & care
Solid eucalyptus, one coordinated finish
Every piece in this suite is solid eucalyptus timber and veneer in the same natural pale finish, so a single wood care kit is all you need to keep the whole suite looking its best.
- Suite includes
- 1× Canberra Gas Lift Bed Frame (size as selected), 2× Canberra Bedside Table, 1× Canberra Tallboy, 1× Canberra Dresser with Mirror
- Bed construction
- Solid eucalyptus hardwood structural frame with eucalyptus veneer over engineered timber on the wide panels; hydraulic gas-lift platform on wooden slats
- Headboard
- Plain panel with an integrated open bookshelf across the top, above two push-open flap-door compartments
- Lighting & charging
- LED strip under the headboard's top rail, switched from a button on the side of the headboard — plug-in, mains powered; USB charging port set flush into the shelf. Fitted on both Queen and King
- Base detail
- Fine vertical fluted panels on the base front, side rails and footboard — shallow, low-relief grooves; the headboard itself is plain
- Bedside construction
- Solid eucalyptus timber and veneer, 2 drawers per table with recessed handle-less pulls and rounded, curved edges
- Tallboy construction
- Solid eucalyptus timber and veneer, 5 drawers with handle-less recessed pulls, 91 × 45 × 120 cm
- Dresser construction
- Solid eucalyptus timber and veneer, 7 drawers with handle-less recessed pulls, 150 × 45 × 86 cm, with a matching timber-framed mirror that fits to the dresser during setup
- Drawers across the suite
- 16 — 2 in each bedside table, 5 in the tallboy, 7 in the dresser
- Finish
- Natural pale timber colour, matched across all five pieces
- Warranty
- 12 months on the bed frame, tallboy and dresser; manufacturer warranty applies to the bedside tables
Recommended care products
Safety
Anchor the tallboy and the dresser — it matters
This suite contains two pieces of clothing-storage furniture that must each be secured to the wall before use: the Canberra Tallboy and the Canberra Dresser with Mirror. Each carries its own mandated safety warning below — they are shown separately because the warnings apply to two different pieces.
Canberra Tallboy
- ALWAYS secure this furniture to the wall with an anchor device.
- NEVER allow children to stand, climb or hang on drawers, doors or shelves.
- NEVER open more than one drawer at a time.
- Place heavy items down low.
- NEVER place a television on this furniture.
Wall-anchoring hardware is inexpensive and takes only minutes to fit. If you're unsure how to anchor the unit, our showroom team can point you to a suitable anchor kit — call 07 3161 5415.
Canberra Dresser with Mirror
- ALWAYS secure this furniture to the wall with an anchor device.
- NEVER allow children to stand, climb or hang on drawers, doors or shelves.
- NEVER open more than one drawer at a time.
- Place heavy items down low.
- NEVER place a television on this furniture.
Fit the mirror to the dresser, and anchor the unit to the wall, before use — the fitted mirror raises the unit's height and centre of gravity. Wall-anchoring hardware is inexpensive and takes only minutes to fit; our showroom team can point you to a suitable anchor kit. Call 07 3161 5415.
The bedside tables are lower and less top-heavy, but as with any freestanding bedroom furniture we recommend anti-tip anchoring for them too, particularly in homes with young children.
The bed's LED strip and USB port are mains powered — the frame plugs into a standard wall outlet. Route the power lead clear of walkways and the gas-lift hinge, and allow for a power point within reach of the bedhead when planning the room. Guide the platform up and down rather than letting it drop, and keep the storage cavity loaded below the slat line so nothing fouls the mechanism.
What's in the box
Ships in 8 cartons across the suite
The bed frame arrives flat-packed in 3 cartons; each bedside table and the tallboy arrive in a carton each, and the dresser arrives in two — one for the dresser, one for the mirror.
- Bed frame
- 3 boxes — LED bookshelf headboard with its two push-open compartments and USB charging port, LED power lead, fluted footboard, gas-lift base with hydraulic mechanism, wooden slats, fittings
- Each bedside table
- 1 box — 67 × 49 × 68 cm (2 boxes total for the pair)
- Tallboy
- 1 box — 128 × 52 × 96 cm; wall anchor must be fitted before use
- Dresser with mirror
- 2 boxes — dresser 157 × 52 × 93 cm, mirror 127 × 111 cm (9 cm deep); fit the mirror, then anchor the unit to the wall before use
- Tools
- Screwdriver (electric drill recommended) for the bed frame
- Mattress
- Not included — bed frame only
Two people are recommended for the bed frame, as the gas-lift mechanism is heavier than a standard bed base. Bedside table assembly details are available from our showroom team on 07 3161 5415. Professional assembly for the whole suite can be added above.
Delivery & pickup
Two ways to get it home
Delivery cost is calculated by item and distance — enter your details in the estimator above, or at checkout. We offer free local delivery to eligible addresses within ~10 km of our Rocklea warehouse; terms and conditions apply. Delivery is to ground level / front garage only.
Collect free from our Rocklea distribution warehouse by appointment. Bring your order confirmation and photo ID. Check the carton sizes above fit your vehicle before you come — the gas-lift base carton is heavier than a standard bed base. For full terms, see our Pickup & Delivery Terms.
The Canberra bed frame, tallboy and dresser are covered by a 12-month warranty — see our Warranty Policy. Change-of-mind returns are accepted under our Return Policy; full conditions apply.
ReviewsWhat buyers say
FAQ
Common questions
Five pieces: one Canberra Gas Lift Bed Frame in your chosen size, two Canberra Bedside Tables, one five-drawer Canberra Tallboy and one seven-drawer Canberra Dresser with its matching framed mirror — all in the same pale eucalyptus finish. A mattress is not included.
Yes — every piece in this suite is also sold individually, and smaller configurations are available: the Canberra 3 Piece Suite (bed and both bedsides), the 4 Piece Tallboy Suite and the 4 Piece Dresser Suite. See "More from the range" above.
Yes — both of them. The Canberra Tallboy and the Canberra Dresser are clothing-storage furniture and must each be secured to the wall with an anchor device before use. On the dresser, fit the mirror first, then anchor, because the mirror raises the unit's height and centre of gravity. Never allow children to climb on the drawers, never open more than one drawer at a time, place heavy items down low, and never put a television on either piece. See the two full safety warnings above.
Sixteen — five in the tallboy, seven in the dresser and two in each of the two bedside tables. That's on top of the bed's full-footprint gas-lift cavity and its two push-open headboard compartments.
Queen and King only. Pick your size from the tiles above the Add to Cart button — the bedside tables, tallboy and dresser are one standard size and are included with either.
The entire slatted mattress platform lifts on hydraulic gas struts, opening a storage cavity the full footprint of the bed — deep enough for bedding, luggage or seasonal clothing. Separately, the headboard has two push-open flap-door compartments beneath its display shelf for smaller bedside items.
Yes. Both are mains powered — the bed plugs into a standard wall outlet, and the LED is switched from a button on the side of the headboard. Allow for a power point within reach of the bedhead when you plan the room. Both features are fitted on the Queen and the King.
8 cartons in total — 3 for the bed frame, 1 for each bedside table, 1 for the tallboy and 2 for the dresser (one for the dresser, one for the mirror). The bed ships flat-packed and needs a screwdriver (electric drill recommended), with two people recommended because the gas-lift mechanism is heavier than a standard bed base. Professional assembly for the whole suite is available as an add-on above.
Full detailsCanberra 5 Piece Bedroom Suite — full product details
The Canberra 5 Piece Bedroom Suite brings together the Canberra Gas Lift Bed Frame, two Canberra Bedside Tables, the five-drawer Canberra Tallboy and the seven-drawer Canberra Dresser with Mirror in one coordinated solid-eucalyptus finish. The bed's slatted mattress platform lifts on hydraulic gas struts to a storage cavity the full footprint of the frame, and its headboard carries an open display shelf lit by an LED strip, a USB charging port set flush into that shelf, and two push-open compartments below. Fine vertical fluting runs across the base front, side rails and footboard, while the headboard itself stays plain. The tallboy stands 120 cm tall on a 91 × 45 cm footprint, the dresser measures 150 × 45 × 86 cm with a 100 × 120 cm framed mirror that fits to it during setup (allow approximately 205 cm overall once fitted), and each bedside table adds two full-width drawers — sixteen drawers across the suite, all with the same recessed, handle-less pulls.
Buying the full suite guarantees every piece comes from the same eucalyptus range and finish run — a match that's difficult to guarantee ordering five pieces months apart. It also means one delivery and one assembly booking for the whole bedroom, rather than five separate ones. The suite ships in 8 cartons in total: 3 for the bed frame, 1 for each bedside table, 1 for the tallboy and 2 for the dresser and its mirror. Both the tallboy and the dresser are clothing-storage furniture and must each be anchored to the wall before use — see the safety section above.
Available in Queen (fits a 153 × 203 cm mattress) and King (183 × 203 cm), the suite is sold frame-only, so pair it with one of our bamboo, pocket spring or mattress-in-a-box ranges. Need less than the full five pieces? The Canberra 3 Piece Bedroom Suite covers the bed and both bedsides, while the 4 Piece Tallboy and 4 Piece Dresser suites each add one storage piece. See the range in person at any of our five A2Z Furniture showrooms: Rocklea, Virginia, Bundall (Gold Coast), North Ipswich and Beenleigh.
