Carinda 4 Piece Tallboy Bedroom Suite
Gloss white LED gas lift bed, 2 bedsides & a 4-drawer tallboy
Hurry! Only 0 units left in stock!
Buy now, pay later — interest-free options
Choose your provider and plan at checkout
Professional assembly — terms & conditions
The professional assembly service applies to ground-level rooms only. It is not available for apartments or for rooms located on an upper floor.
The service covers assembly of the product only. Removal and disposal of packaging materials is not included.
The A2Z Furniture Pty Ltd and its staff accept no liability for any accidental damage to the customer’s property that may occur while bringing goods inside or during assembly.
It is the customer’s responsibility to ensure the pathway for delivering the goods is clear and unobstructed. Additional charges may apply if extra work is required to clear access.
To assess whether the assembly can be carried out safely and efficiently, The A2Z Furniture may request further information about the property, including photos or video of the layout.
If the product cannot be delivered to the intended room due to insufficient space, the delivery and assembly charges are non-refundable.
The A2Z Furniture reserves the right, at its sole discretion, to decline or cancel the assembly service. Where this occurs, any assembly fee already paid will be refunded in full.
Overview
A coordinated Carinda bedroom, with the tallboy included
The Carinda 4 Piece Tallboy Bedroom Suite pairs the Carinda Gas Lift Bed Frame with two matching Carinda Bedside Tables and the four-drawer Carinda Tallboy, all built from the same gloss white lacquer so the whole room reads as one considered setup rather than pieces bought separately over time. The bed's mattress platform lifts on two heavy-duty hydraulic pistons to a storage cavity the full footprint of the frame, while the tall headboard carries a stepped recessed channel housing a built-in warm-white LED strip, switched from a button on its side. The tallboy adds a full column of folded-clothing storage in the same handle-less detailing, and each bedside table brings two more drawers — eight drawers across the suite. Available in Queen and King.
Full-Footprint Gas Lift Storage
The whole mattress platform lifts on two heavy-duty hydraulic pistons to a storage cavity the size of the bed's footprint.
A Headboard That Lights the Room
A warm-white LED strip concealed in the headboard’s stepped channel, switched from a button on the side — the suite’s only decorative flourish.
Two Matching Bedside Tables
Two full-width drawers apiece with recessed handle-less pulls, in the same gloss white as the bed.
Eight Drawers Across the Suite
The tallboy's four drawers plus two in each bedside table — a full column of folded-clothing storage on top of the bed's cavity.
Guaranteed Finish Match
All four pieces come from the same lacquer run — a match you can't guarantee buying the pieces months apart.
DimensionsEvery piece, measured
Carinda Gas Lift Bed Frame (Queen)
| Fits mattress | 153 × 203 cm |
|---|---|
| Frame footprint (L × W) | 220 × 160 cm |
| Headboard height | 120 cm |
| Footboard height | 46 cm |
| Slat height (floor to slat platform) | 33 cm |
| Cartons (boxed, selected size) | 3 boxes — 169×127×11, 215×53×22 & 153×203×5 cm |
Carinda Bedside Table (each, ×2)
| Length | 60 cm |
|---|---|
| Width | 41 cm |
| Height | 53 cm |
| Drawers | 2 |
| Box (single carton, each) | 62 × 46 × 62 cm |
Carinda Tallboy
| Length | 90 cm |
|---|---|
| Width | 45 cm |
| Height | 118 cm |
| Drawers | 4 |
| Box (single carton) | 124 × 51 × 96 cm |
These figures come from each piece’s own verified product page. Frame footprint is the floor space the assembled bed occupies; the mattress sits on the slat platform, so allow for mattress thickness above the slat height. Check the longest carton against your access route — stairwells, lift doors and tight corners are where flat-packed beds get stuck. Internal drawer measurements and runner type for the bedside tables are available on request. If a measurement is critical, call our showroom team on 07 3161 5415 before you order. Measurements are taken by hand and can vary slightly between shipments.
Works with your mattress
Will it fit your mattress?
The gas-lift platform takes a standard Australian mattress of the matching size directly on its wooden slats — no box spring or ensemble base needed. Queen fits a 153 × 203 cm mattress, King fits 183 × 203 cm.
Pair with a mattress
Materials & care
Gloss white lacquer, one coordinated finish
Every piece in this suite is finished in the same gloss white lacquer over a solid New Zealand pine and MDF construction, so a single care kit is all you need to keep the whole suite looking its best.
- Suite includes
- 1× Carinda Gas Lift Bed Frame (size as selected), 2× Carinda Bedside Table, 1× Carinda Tallboy
- Bed construction
- Solid New Zealand pine structural frame with MDF for the lacquered panels (headboard, footboard, base sides); hydraulic gas-lift platform on two heavy-duty pistons with wooden slats
- Headboard
- Tall flat panel with a stepped, offset recessed channel housing the built-in LED strip; all corners softly rounded
- Lighting
- Built-in warm-white LED strip concealed in the headboard channel, running its full width including the stepped jog — switched from a button on the side of the headboard; plug-in, mains powered. Fitted on both Queen and King
- Footboard
- Clean flat footboard panel with rounded corners — no decorative detail; the headboard carries the only feature, its lit stepped channel
- Bedside construction
- Solid NZ pine and MDF, 2 drawers per table with recessed handle-less pulls and soft rounded top corners
- Tallboy construction
- Solid NZ pine and MDF, 4 drawers with handle-less recessed pulls and soft rounded top corners, 90 × 45 × 118 cm
- Drawers across the suite
- 8 — 2 in each bedside table, 4 in the tallboy
- Finish
- Gloss white lacquer — smooth, paint-grade, no visible grain — matched across all four pieces
- Warranty
- 12 months on the bed frame and the tallboy; manufacturer warranty applies to the bedside tables
Recommended care products
Safety
Anchor the tallboy — it matters
Like all tall clothing-storage furniture, the Carinda Tallboy included in this suite must be secured to the wall before use. Wall-anchoring hardware is inexpensive, widely available from hardware stores, and takes only minutes to fit. The mandated safety warning below applies specifically to the tallboy.
- ALWAYS secure this furniture to the wall with an anchor device.
- NEVER allow children to stand, climb or hang on drawers, doors or shelves.
- NEVER open more than one drawer at a time.
- Place heavy items down low.
- NEVER place a television on this furniture.
Wall-anchoring hardware is inexpensive and takes only minutes to fit. If you're unsure how to anchor the unit, our showroom team can point you to a suitable anchor kit — call 07 3161 5415.
The bedside tables are lower and less top-heavy, but as with any freestanding bedroom furniture we recommend anti-tip anchoring for them too, particularly in homes with young children.
The bed's LED strip is mains powered — the frame plugs into a standard wall outlet. Route the power lead clear of walkways and the gas-lift hinge, and allow for a power point within reach of the bedhead when planning the room. Guide the platform up and down rather than letting it drop, and keep the storage cavity loaded below the slat line so nothing fouls the mechanism.
What's in the box
Ships in 6 cartons across the suite
The bed frame arrives flat-packed in 3 cartons; each bedside table and the tallboy arrive in a single carton each.
- Bed frame
- 3 boxes — LED headboard, LED power lead, footboard, gas-lift base with two hydraulic pistons, wooden slats, fittings
- Each bedside table
- 1 box — 62 × 46 × 62 cm (2 boxes total for the pair)
- Tallboy
- 1 box — 124 × 51 × 96 cm; wall anchor must be fitted before use
- Tools
- Screwdriver (electric drill recommended) for the bed frame
- Mattress
- Not included — bed frame only
Two people are recommended for the bed frame, as the gas-lift mechanism is heavier than a standard bed base. Bedside table assembly details are available from our showroom team on 07 3161 5415. Professional assembly for the whole suite can be added above.
Delivery & pickup
Two ways to get it home
Delivery cost is calculated by item and distance — enter your details in the estimator above, or at checkout. We offer free local delivery to eligible addresses within ~10 km of our Rocklea warehouse; terms and conditions apply. Delivery is to ground level / front garage only.
Collect free from our Rocklea distribution warehouse by appointment. Bring your order confirmation and photo ID. Check the carton sizes above fit your vehicle before you come — the gas-lift base carton is heavier than a standard bed base. For full terms, see our Pickup & Delivery Terms.
The Carinda bed frame and tallboy are covered by a 12-month warranty — see our Warranty Policy. Change-of-mind returns are accepted under our Return Policy; full conditions apply.
ReviewsWhat buyers say
FAQ
Common questions
Four pieces: one Carinda Gas Lift Bed Frame in your chosen size, two Carinda Bedside Tables and one four-drawer Carinda Tallboy, all in the same gloss white finish. A mattress is not included.
Yes — the bed frame, bedside tables and tallboy are each also sold individually. If you don't need the tallboy, the Carinda 3 Piece Suite has the bed and both bedsides only. See "More from the range" above.
Yes. Like all tall clothing-storage furniture, the Carinda Tallboy must be secured to the wall with an anchor device before use — never allow children to climb on the drawers, never open more than one drawer at a time, place heavy items down low, and never put a television on it. See the full safety warning above. Anchor kits are inexpensive and widely available; our showroom team can point you to a suitable one on 07 3161 5415.
Eight — four in the tallboy and two in each of the two bedside tables. That's on top of the full-footprint storage cavity under the bed.
Queen and King only. Pick your size from the tiles above the Add to Cart button — the two bedside tables and the tallboy are one standard size and are included with either.
The entire slatted mattress platform lifts on two heavy-duty hydraulic pistons, opening a storage cavity the full footprint of the bed — deep enough for bedding, luggage or seasonal clothing. The bedside tables add drawer storage either side.
Yes. The headboard’s LED strip is mains powered — the bed plugs into a standard wall outlet and is switched from a button on the side of the headboard. Allow for a power point within reach of the bedhead when you plan the room. The LED is fitted on both the Queen and the King.
6 cartons in total — 3 for the bed frame, 1 for each bedside table and 1 for the tallboy. The bed ships flat-packed and needs a screwdriver (electric drill recommended), with two people recommended because the gas-lift mechanism is heavier than a standard bed base. Professional assembly for the whole suite is available as an add-on above.
Full detailsCarinda 4 Piece Tallboy Bedroom Suite — full product details
The Carinda 4 Piece Tallboy Bedroom Suite brings together the Carinda Gas Lift Bed Frame, two Carinda Bedside Tables and the four-drawer Carinda Tallboy in one coordinated gloss white lacquered finish. The bed's slatted mattress platform lifts on two heavy-duty hydraulic pistons to a storage cavity the full footprint of the frame, and its tall headboard carries a stepped recessed channel housing a built-in warm-white LED strip, switched from a button on the side. The footboard is a clean flat panel and every corner is softly rounded — there is no other decoration on the suite. The tallboy stands 118 cm tall on a 90 × 45 cm footprint, and each bedside table adds two full-width drawers — eight drawers across the suite, all with the same recessed, handle-less pulls.
Buying the suite guarantees every piece comes from the same lacquer run — a match that's difficult to guarantee ordering the bed, bedside tables and tallboy months apart. It also means one delivery and one assembly booking for the whole bedroom, rather than separate ones for each piece. The suite ships in 6 cartons in total: 3 for the bed frame, 1 for each bedside table and 1 for the tallboy. The tallboy is clothing-storage furniture and must be anchored to the wall before use — see the safety section above.
Available in Queen (fits a 153 × 203 cm mattress) and King (183 × 203 cm), the suite is sold frame-only, so pair it with one of our bamboo, pocket spring or mattress-in-a-box ranges. Prefer the bed and bedsides on their own? The Carinda 3 Piece Bedroom Suite drops the tallboy. See the range in person at any of our five A2Z Furniture showrooms: Rocklea, Virginia, Bundall (Gold Coast), North Ipswich and Beenleigh.