Faith Bed Frame
Velvet bed with a built-in sitting bench and storage drawers at the foot
Includes the velvet-upholstered frame, headboard, slat base and integrated footboard bench. Add a matching Queen mattress →
Hurry! Only 6 units left in stock!
Professional assembly — terms & conditions
The professional assembly service applies to ground-level rooms only. It is not available for apartments or for rooms located on an upper floor.
The service covers assembly of the product only. Removal and disposal of packaging materials is not included.
The A2Z Furniture Pty Ltd and its staff accept no liability for any accidental damage to the customer’s property that may occur while bringing goods inside or during assembly.
It is the customer’s responsibility to ensure the pathway for delivering the goods is clear and unobstructed. Additional charges may apply if extra work is required to clear access.
To assess whether the assembly can be carried out safely and efficiently, The A2Z Furniture may request further information about the property, including photos or video of the layout.
If the product cannot be delivered to the intended room due to insufficient space, the delivery and assembly charges are non-refundable.
The A2Z Furniture reserves the right, at its sole discretion, to decline or cancel the assembly service. Where this occurs, any assembly fee already paid will be refunded in full.
Overview
A velvet bed built around a sitting bench, not a plain footboard
The Faith pairs a vertical channel-tufted velvet headboard with an integrated upholstered bench at the foot of the bed — rolled arms on either side, two channel-detailed drawers built into the bench front, and a flat top wide enough to sit on while putting on shoes or staging clean linen during a bed change. The bench isn't a separate ottoman pushed up against a plain footboard — it's built into the bed as one coordinated piece. Available in Blue or Dark Grey velvet-textured upholstery, in Queen and King sizes.
Integrated sitting & storage bench
The defining feature of the Faith: an upholstered bench at the foot of the bed with rolled side arms, two pull-out drawers in the bench front, and a sitable flat top — useful for putting on shoes, laying out bedding, or a moment's perch while getting dressed. This is a purpose-built bench, not a plain footboard.
Vertical channel-tufted headboard
Tall channel detail runs the full width of the headboard, with the same channel treatment repeated on the bench drawers so the whole bed reads as one coordinated piece.
Straight wooden slats + wooden middle bar
Straight wooden slats take a standard mattress directly, with a wooden middle support bar included where applicable for the size — no box spring needed.
Two velvet colourways
Deep Blue for moodier, more dramatic bedroom schemes, or Dark Grey for a neutral that pairs with most palettes — same construction, same bench, two distinct looks.
Works with your mattress
Will it fit your mattress?
A bed frame is only right with the right mattress. Here's what's included, what to buy, and how the slat base supports it — the details most bed listings leave out.
Mattress not included
Sold as the frame only. Choose your size, then pair a standard Australian mattress of the same size. See mattress options →
Buy the matching size
Each frame fits a standard AU mattress of the same name — a Queen frame takes a 153 × 203 cm Queen mattress. The full size chart is in Dimensions.
Slat base, no box spring
The wooden slat base with centre support bar holds the mattress directly — no box spring or extra foundation needed. Works with foam, hybrid and spring mattresses.
Slat base & mattress support
Slat base included — suited to spring mattresses, and supports most foam and hybrid mattresses too. If you're matching a specific foam or hybrid mattress, check the slat spacing with our team before ordering, since some foam-mattress warranties require gaps under ~7.5 cm.
Pair with a mattress
DimensionsWill it fit your room?
| Fits mattress (selected size) | 153 × 203 cm |
|---|---|
| Frame footprint (W × L) | 165 × 255 cm |
| Headboard height | 110 cm |
| Footboard bench height | 64 cm |
| Cartons (boxed, selected size) | 3 boxes — 167×120×10, 280×21×10 & 145×45×40 cm |
Total height = slat height + your mattress depth (exact slat height isn't confirmed on our current spec sheet — contact our team on 07 3161 5415 if you need it). Ships flat-packed in 3 boxes; measure your access route and check the boxes fit your vehicle for pickup. A screwdriver is needed (electric drill recommended); two people recommended. Measurements are taken by hand and can vary slightly between shipments.
📦Ships flat-packed
Cartons clear a standard ~80 cm doorway even when the assembled piece is large. Still worth measuring for the bigger sizes.
🧭Room clearance
Allow 60–75 cm around the piece to move comfortably; remember the frame footprint runs a few cm larger than the mattress.
📐Total height
Total height = base + your mattress, so a tall base plus a deep mattress can sit high — worth checking for getting in and out.
🚙Pickup vehicle
For free Rocklea pickup, a flat-pack fits most cars, but an assembled or oversized item needs a van, ute or trailer.
Australian size chart
| Size | Fits mattress (W × L) |
|---|---|
| Queen | 153 × 203 cm |
| King | 183 × 203 cm |
Australian sizes differ from US and UK — always check the centimetre dimensions, not just the name. Unsure which to choose? Read our Australian bed sizes guide.
Materials & careBuilt to live with
- Upholstery
- Velvet-textured fabric (Blue · Dark Grey)
- Frame
- Wooden internal frame with upholstered headboard, side rails & footboard bench
- Headboard
- Included — vertical channel-tufted, full width
- Footboard bench
- Integrated upholstered bench with rolled side arms, sitable flat top & two channel-detailed pull-out drawers — not a plain footboard
- Middle support
- Wooden middle support bar (included where applicable — varies by size)
- Base
- Straight wooden slats (no box spring)
- Legs
- Dark-stained tapered legs on the bed and bench
- Assembly
- Flat-packed; screwdriver needed (electric drill recommended); 2 people recommended
- Warranty
- 12 months
- Instructions
- Download instruction manual (PDF)
Care instructions
Vacuum gently weekly
Use a soft-brush vacuum attachment on low suction. Velvet pile is more delicate than flat fabric — aggressive vacuuming can crush or flatten the pile over time.
Blot spills immediately
Treat spills with a clean dry cloth right away. Blot — don't rub. Rubbing on velvet smears the pile direction and can leave a permanent mark even after the stain clears.
Brush the pile periodically
Velvet pile naturally lays differently depending on where it's been pressed — sitting on the bench, leaning on the headboard. A soft brush in the direction of the pile keeps the finish looking even.
Keep out of direct sun
Sustained UV fades velvet visibly over time. Blue shows fading more than Dark Grey, but both colours benefit from being kept out of harsh afternoon sun.
Recommended care products
What's in the boxShips flat-packed in three boxes
Each size ships as three flat-packed boxes for easier doorway and stair access. A screwdriver is needed (an electric drill is recommended), and two people are recommended for handling the upholstered headboard and bench.
- Boxes
- 3 flat-packed boxes per bed (Queen & King)
- Queen carton sizes
- 167×120×10, 280×21×10 & 145×45×40 cm
- King carton sizes
- 197×120×10, 280×21×10 & 175×45×40 cm
- Includes
- Headboard, footboard bench (with bench drawers), side rails, wooden slats, wooden middle support (where applicable) & legs, fittings
- Tools
- Screwdriver (electric drill recommended)
- Mattress
- Not included — frame only
- Instructions
- Download instruction manual (PDF)
Delivery & pickupTwo ways to get it home
Delivery cost is calculated by item and distance — enter your details in the estimator above, or at checkout. We offer free local delivery to eligible addresses within ~10 km of our Rocklea warehouse; terms and conditions apply. Delivery is to ground level / front garage only. The bed ships flat-packed in 3 boxes — add professional assembly in the buy box if you'd like our team to put it together on the day.
Collect free from our Rocklea distribution warehouse by appointment. Bring your order confirmation and photo ID. Check the carton sizes above fit your vehicle before you come. For full terms, see our Pickup & Delivery Terms.
The Faith is covered by a 12-month warranty — see our Warranty Policy. Change-of-mind returns are accepted under our Return Policy; full conditions apply.
ReviewsWhat buyers say
FAQ
Common questions
The Faith is available in Queen and King sizes only — Single, King Single and Double aren't available for this bed. The bed takes a standard mattress of the matching size.
The footboard bench is an upholstered seat with rolled arms on either side and two pull-out drawers built into the bench front — it's a purpose-built bench, not a plain footboard or a separate ottoman. Yes, the top is designed to be sitable — useful for putting on shoes, laying out clean linen during a bed change, or a moment's perch while getting dressed. The drawers suit spare bedding, pyjamas or anything you'd rather keep close to the bed. The bench is part of the bed package and arrives in the same delivery.
No — the Faith is sold as the frame only. Browse our mattress range to pair with it, or speak with our team in any of our five SE QLD showrooms.
The straight wooden slat base suits foam, hybrid and most spring mattresses, and needs no box spring. If you'd like us to confirm the exact slat spacing on the Faith for your mattress and warranty, contact our team and we'll check it for you.
Yes — the Faith ships flat-packed in three boxes with clear instructions. A screwdriver is needed (an electric drill is recommended), and two people are recommended for handling the upholstered headboard and bench. You can add professional assembly in the buy box to have our team put it together on delivery day (ground level only).
Yes — the Faith Bedside Table is the matching piece, available in the same Blue and Dark Grey velvet to coordinate with the bed (sold separately).
Full detailsFaith Bed Frame — full product details
Footboard benches are an older bedroom convention that's coming back into contemporary design — but usually as a separate ottoman pushed up against the bed. The Faith Bed Frame builds the bench directly into the bed instead: rolled arms on either side, two channel-detailed pull-out drawers in the front, and a sitable top surface at the right height for putting on shoes or perching while making the bed. The bench's channel detailing mirrors the channel-tufting on the headboard, so the bed reads as a single coordinated piece rather than a bed plus an add-on.
The upholstery is a velvet-textured fabric across every visible surface — headboard, side rails, footboard bench and bench drawers. Most modern furniture velvet is a synthetic polyester blend rather than silk or cotton velvet; the visual depth and soft-touch feel are typical of velvet regardless of fibre composition, and the general care requirements — gentle vacuuming, prompt spill response, brushing the pile direction periodically — are the same either way. Choose deep Blue for moodier, more dramatic bedroom schemes, or Dark Grey for a neutral that pairs with most palettes.
Available in Queen and King only, the Faith is built around a wooden internal frame with straight wooden slats included, and a wooden middle support bar where applicable for the size. Pair it with the right mattress — browse our pocket spring, memory foam and full mattress range. The Faith coordinates with the matching Faith Bedside Table. Browse more bed frames, or visit one of our five South-East Queensland showrooms in Rocklea, Virginia, Beenleigh, Bundall and North Ipswich to see the Faith in person.

